Technical Data Sheet Updates
|
|
|||
 |
 |
 |
|
|
EA 100-20 2K-EP-AY-Grundierung |
1K Fast Filler Grey |
1K Isolator |
|
|
Changes to TDS: The following information has been added: (Density, theoretical spreading rate, solids content and VOC) have been updated. |
Changes to TDS: The following information has been added: Storage time has been changed from 3 years to 2 years.
|
Changes to TDS: The following information has been added: Storage time has been changed from 3 years to 2 years. |
|
.png){kind=small} |
|
|
|
 |
 |
 |
|
|
P97 Switch |
Mipatherm | EP 109-20 2K Primer/Adhesion RAL 1024 | |
|
Changes to TDS: The following information has been added: The two colour shades green and blue were combined in one TDS.
|
Changes to TDS: The following information has been added: Under "Processing instructions" has been changed: The optimal film properties and the full chemical and mechanical resistance are achieved after the first heat exposure (approx. 1 hour at at least 300 °C instead of 400 °C). |
Changes to TDS: The following information has been added: The specification of the drying time until it can be painted over has changed as follows: "recoatable at the earliest after 20 min & at the latest after 14 days. If drying for > 14 d, intermediate sanding required." |
|
|
|
|
|
|
 |
 |
||
|
WBC Vicrom |
2K Thinner Extra Fast VR |
||
|
Changes to TDS: The following information has been added: VOC was changed to 450 g/l (before the max. value of 840 g/l for this category was given)
|
Changes to TDS: The following information has been added: The storage time has changed to 3 years.
|
||
| |
|